Hand Built in the USA Professional Custom 4 Way Tele Harness Brand N
If you are working on a new Tele Project or just want to customise your existing Tele for that high end professional result then this send in ready to go harness will deliver +.
This product is brand new and not been out of the box. $150 firm price.
I was planning to work on two Tele build projects (& purchased 2 new harness) but due to other time commitments I have decided to concentrate on just the 1 project, so this 2nd new unit is now for sale at below cost = My cost less freight and less GST costs all removed.
What you see in the pics is what you get + full installation instructions provided.
Price $150, pickup Auckland or courier at buyers additional postage.
Phone Si on 027 807 2349 or email me at firstname.lastname@example.org for more details/enquiry..
T4W-C 4-Way Control Plate
920D Custom T4W-C 4-Way Control Plate
920D Custom 4-Way Control Plates are far from stock. This pre-wired, send-in piece is built to completely clean up your tone and let the full quality of your pickups shine through. The control plate is the ultimate upgrade to polish and improve your tone.
1 - Chrome Control Plate
2 - Chrome Flat Top Knobs
2 - 920D Custom 450G Series 250K Pots by CTS
1 - Genuine 4 Way Oak Grigsby Switch
1 - .022 Orange send Capacitor by Sprague Electric
1 - Pure Tone Output Jack
920D Custom Signature Wiring by Gavitt Wire
Bridge/Neck in Parallel
Bridge/Neck in Series
920D Custom Signature Wiring
All 920D Custom products are highlighted with signature orange wire. Gavitt Wire, a leading producer of premium guitar wire, has agreed to custom manufacture the signature cloth covered pushback wire, and we believe it is the perfect choice for hotrodding your guitar. The wire is built with an outer waxed cotton layer and an inner Celanese braid that provides impressive ruggedness while still maintaining a 22 gauge thickness. Limiting the amount of wire on each build compliments your choice of pickups by creating the perfect balance between capacitance and resistance.
920D Custom 450G Series Potentiometers
920D Custom potentiometers are used in this build. The pots are manufactured by CTS to the assemblers exact specifications and are metered for accuracy before being used in any 920D Custom gear.
The assembler specify a 10% audio taper, accompanied with a low rotational torque rating of 0.50-2.00 in.oz (compared to the industry standard 0.75-6.00 in.oz rating) to provide a buttery knob sweep.
The assembler hold potentiometer tolerances to ±10%. The industry standard is ±20%. Tightening potentiometer tolerances will help you accurately shape your tone.
Pure Tone 1/4 Output Jack
The manufacturer exclusively use Pure Tone output jacks in all builds. Why? Because they're unquestionably better than the old, industry standard. Period.
We've all heard the crackle of a weak connection caused by pressure grounds. This is due to the old style jack only having 1 squared-off point of contact trying to meet a rounded quarter inch plug. Pure Tone has completely changed that.
Pure Tone's multi-contact quarter inch output jack has 4 rounded contact points that hold the quarter inch plug firmly in place. With 4 times the contact points, all of the dreaded cracks, snaps, and pops are gone for good. Trust us, the second you plug into this jack, you'll never want to go back.
Sprague Orange send Capacitors
We've used Sprague Orange send Capacitors in our builds since day 1. Orange send Polyester Film/Foil Capacitors are wound from the most reliable polyester film and aluminum foil available and are protected by a rugged conformal coating of orange epoxy.
All of that to say, these capacitors do a tremendous job of warming up your tone and taking away some of the bite of an overly bright sound. Like our potentiometers, these capacitors are held to a ±10% tolerance.
4 Way Oak Grigsby
This T4W-C is also built with a Oak Grigsby 4 Way Switch. These switches are well known for their durability and noise-free reliability. These switches are rated to last a lifetime of serious playing. This switch is certainly the switch you want in your guitar.
Hand-Built In The U.S.A.
All 920D Custom creations are hand-built by experienced technicians at our headquarters in Conway, Arkansas. We treat your new gear like it's going into one of our own guitars. Every millimeter of wire is cut precisely, every solder joint is perfectly smooth and symmetrical, and every bend is purposeful and direct. We hold everything to a tremendous level of quality because we know the smallest details matter and we take great pride in our work.
Keywords: For Sale